We look at your site
PushRPM loads your real pages the way a visitor does and spots exactly where your ads are underearning.
for WordPress AdSense publishers
Find the ad money you’re already losing. Fix it safely. Prove the lift.
PushRPM connects to your WordPress site, finds where your ads are quietly underearning, and fixes it without risking your AdSense account. You only see changes that make money — and we show you the before-and-after in dollars. No ad-tech skills needed.
It all comes down to your RPM — how much your ads earn per 1,000 visitors. We push it higher.
Free for 7 days. Cancel anytime in one click — no charge if you cancel before day 8.
Not ready? Run the free site analyzer firstRuns on WordPresswon’t risk your AdSense accountcancel anytime
Works with your stack
Drops into the monetization stack publishers already run — no migration, no rip-and-replace.
ASGoogle AdSenseAdXAdXEZEzoicMVMediavineRPRaptiveMNMonumetricMMedia.netAPSAmazon Publisher ServicesPMPubMaticOXOpenXPBPrebidCUCustom ad units
Compatibility references only · PushRPM is not affiliated with or endorsed by these networks unless stated.
built for publishers, priced for the lift
Honest about what you get — a measured range, not a magic number.
+10–40%
typical RPM lift range publishers see
7-day
free trial — no charge if you cancel
1-click
rollback on any change
24/7
continuous scanning for the next win
Ranges reflect what publishers can typically expect — every dollar shown in your dashboard is measured on your own connected site.
// the pushrpm engine
Scan, optimize, prove, repeat — value that compounds.
One short setup becomes a continuous loop. Find a leak, fix it safely, measure the RPM lift, find the next one. The dashboard always answers: what did PushRPM earn me, and what's next?
We fix it safely
You get plain-English fixes to apply in one click — or turn on autopilot and let us apply the safe, proven ones for you.
We prove it paid off
We compare your earnings before and after each change, so you see the exact dollars it added — not a guess.
We keep going
PushRPM keeps watching. Every new check finds the next thing to fix, so your earnings keep improving.
// revenue leaks
RPM leaks through what you can't easily see at scale.
PushRPM reads your actual rendered site — not self-reported numbers — to find the placement, density, layout, and reporting issues quietly holding your revenue back.
Ads where nobody looks
earns lessAd slots placed where readers rarely scroll still load, but barely earn — quietly leaving money on the table across every post.
Ads that make the page jump
hurts rankingAds that shove your text around as they load frustrate readers and can hurt your Google ranking — a problem Google calls bad Core Web Vitals (CLS).
Too few — or too many — ads
earns lessToo few ads and you leave money behind; too many and you risk an AdSense penalty. We find the safe sweet spot for each type of page.
Built for the wrong device
earns lessIf your ads are laid out for desktop but most readers are on their phone, your best ad space is wasted. We match the layout to how people actually read your site.
// by hand vs. pushrpm
The same job, without the guesswork.
Optimizing ad revenue by hand means hunting for problems you can't see, copying changes that may not fit your site, and waiting weeks to find out if it worked. PushRPM does the measuring, the fixing, and the proving for you.
the job
doing it by hand
with pushrpm
Finding where ads underearn
Eyeball your pages and guess
Scans your rendered site and ranks every leak by $ impact
Knowing what to change
Read forums, copy other sites
Plain-English fixes proven on sites like yours
Staying AdSense-safe
Hope you didn't cross a line
Density caps + safety scores on every change
Proving it worked
Squint at AdSense weeks later
Measured before/after in dollars, per change
Undoing a bad change
Manually rebuild your layout
One-click rollback, anytime
Keeping it improving
Set it and forget it
Keeps scanning and surfaces the next win
// the moat
You get the winning moves from sites like yours.
PushRPM has learned what actually grows earnings for sites in your niche — recipe blogs, news sites, how-to guides, and more. When something works for sites like yours, you get that proven move too. Your own data stays private; we only share the lessons, never your numbers.
1,200+
sites_learned
40+
niches_mapped
8,400+
wins_transferred
Recipe blogs
+22% RPManchor + in-content @ 3rd paragraph
News / editorial
+14% RPMreserved-height sticky sidebar
How-to / docs
+19% RPMlazy below-fold, no early interstitial
Illustrative playbook patterns — anonymized cohort aggregates, minimum cohort size enforced.
// proof, not promises
See the dollars on every change — or undo it instantly.
PushRPM compares your earnings before and after each fix, against your own site's history. You never have to take our word for it: if a change doesn't pay off, undo it in one click. Your real numbers come from your connected site.
how the before/after looks
example layoutbefore
$4.20
your ad here · 300 × 250
after · pushrpm
$6.10
▲ viewable · above-fold · +RPM
Sample numbers to show the layout. Your dashboard shows your real before/after, measured from your own AdSense data.
typical RPM lift publishers see
+10–40%
A realistic range, not a promise. Your result depends on your niche, traffic, and how your ads are set up today — sites with bigger leaks tend to gain more. The only numbers that matter are the ones measured on your connected site.
1-click
undo any change you don't like
$0
extra ad-tech tools to learn
24/7
always finding the next fix
// pricing
Start with the plan that fits, grow as your earnings do.
Connect your WordPress site, see your revenue leaks, and start fixing them safely. PushRPM costs a fraction of the earnings it sets out to recover for you.
Free for 7 days on Starter. Your card is charged $19/mo on day 8 — unless you cancel first. Cancel anytime in one click, and we offer a refund if PushRPM isn’t for you.
Starter
Find the money you're leaving on the table. Deep scans + the Revenue Leak Detector show exactly what's suppressing your RPM on one site — then fix it in one click, with your real AdSense earnings in the loop.
Growth
Most popularPut your RPM on autopilot. PushRPM auto-applies safe wins 24/7, A/B-tests placements, proves the before/after dollars on every change, and taps the cross-site brain that learns from publishers in your niche. The favorite of growing publishers — add more sites whenever you want.
Scale
Maximum lift for portfolios and four-figure-plus earners. Aggressive growth autopilot, live real-time analytics, the full niche-playbook library, priority support, and the best per-site rate — built to push RPM across every site you run.
// faq
Questions publishers ask before connecting a site.
PushRPM continuously scans your rendered WordPress site for low-viewability placements, layout shift, ad density vs. policy risk, mobile/desktop mismatch, and reporting gaps — then ranks each leak by projected RPM impact.
It depends heavily on niche, audience geography, and seasonality — there is no single universal number. Many content sites see page RPMs anywhere from a few dollars to $15+, with finance, insurance, and B2B niches at the high end and broad lifestyle traffic lower. Instead of chasing a fixed target, PushRPM benchmarks your RPM against anonymized sites in your own niche and traffic profile, so "good" is measured against comparable publishers.
Yes — placement is one of the biggest controllable factors in RPM. Viewability, position relative to content, ad density, and mobile vs. desktop layout all change how much each impression earns. PushRPM scans your rendered pages for low-viewability and underperforming placements and ranks each fix by projected dollar impact.
Some placement and density fixes can move earnings within days, but AdSense reporting and ad demand fluctuate, so PushRPM measures the before/after across a stabilization window rather than reacting to a single day. How much and how fast depends on your traffic volume, niche, and how many leaks your site has to begin with.
Yes for the full workflow. The plugin connects PushRPM to your real WordPress site so scans, one-click apply, and before/after RPM measurement all run against live data.
Yes — policy safety is built in. Density caps and safety scores guard every change that raises ad density, and one-click rollback means you're never stuck with a change.
PushRPM learns what lifts RPM per niche and traffic profile across every site it manages, then transfers proven wins to similar underperforming sites — using only anonymized, cohort-gated patterns.
Nothing surprising. Your card is charged the plan price on day 8 only if you haven't canceled — and you can cancel anytime in one click before then. Billing and cancellation are handled securely through Stripe, and we offer a refund if PushRPM isn't a fit. See our Terms for the full refund policy.
PushRPM is built for WordPress publishers monetizing with AdSense and custom ad units. It works alongside common monetization stacks without implying any official partnership.
Learn
Guides, tools, and comparisons for publishers
A growing library of practical, policy-safe writing on AdSense, RPM, ad placement, and Core Web Vitals — plus free tools and honest comparisons to help you decide.
start the engine
See how much ad money your site is leaving on the table.
Start free for 7 days, connect your WordPress site, and let PushRPM show you exactly where your ads are underearning — then fix it safely and prove the lift in dollars.
Cancel anytime in one click. Questions first? Talk to us.
Runs on WordPress